diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000000000000000000000000000000000000..1ff0c423042b46cb1d617b81efb715defbe8054d
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln merge=binary
+#*.csproj merge=binary
+#*.vbproj merge=binary
+#*.vcxproj merge=binary
+#*.vcproj merge=binary
+#*.dbproj merge=binary
+#*.fsproj merge=binary
+#*.lsproj merge=binary
+#*.wixproj merge=binary
+#*.modelproj merge=binary
+#*.sqlproj merge=binary
+#*.wwaproj merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg binary
+#*.png binary
+#*.gif binary
+
+###############################################################################
+# diff behavior for common document formats
+#
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the
+# entries below.
+###############################################################################
+#*.doc diff=astextplain
+#*.DOC diff=astextplain
+#*.docx diff=astextplain
+#*.DOCX diff=astextplain
+#*.dot diff=astextplain
+#*.DOT diff=astextplain
+#*.pdf diff=astextplain
+#*.PDF diff=astextplain
+#*.rtf diff=astextplain
+#*.RTF diff=astextplain
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000000000000000000000000000000000000..3a2238d6bfb9a40c1fdf8d76d3e53855b1d57118
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,245 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+
+# User-specific files
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+[Xx]64/
+[Xx]86/
+[Bb]uild/
+bld/
+[Bb]in/
+[Oo]bj/
+
+# Visual Studio 2015 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# DNX
+project.lock.json
+artifacts/
+
+*_i.c
+*_p.c
+*_i.h
+*.ilk
+*.meta
+*.obj
+*.pch
+*.pdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding add-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+
+# TODO: Un-comment the next line if you do not want to checkin
+# your web deploy settings because they may include unencrypted
+# passwords
+#*.pubxml
+*.publishproj
+
+# NuGet Packages
+*.nupkg
+# The packages folder can be ignored because of Package Restore
+**/packages/*
+# except build/, which is used as an MSBuild target.
+!**/packages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/packages/repositories.config
+# NuGet v3's project.json files produces more ignoreable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Microsoft Azure ApplicationInsights config file
+ApplicationInsights.config
+
+# Windows Store app package directory
+AppPackages/
+BundleArtifacts/
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!*.[Cc]ache/
+
+# Others
+ClientBin/
+[Ss]tyle[Cc]op.*
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.pfx
+*.publishsettings
+node_modules/
+orleans.codegen.cs
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+
+# SQL Server files
+*.mdf
+*.ldf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# LightSwitch generated files
+GeneratedArtifacts/
+ModelManifest.xml
+
+# Paket dependency manager
+.paket/paket.exe
+
+# FAKE - F# Make
+.fake/
\ No newline at end of file
diff --git a/Module1/App.config b/Module1/App.config
new file mode 100644
index 0000000000000000000000000000000000000000..731f6de6c291e303814b02808f34140fe560e8e4
--- /dev/null
+++ b/Module1/App.config
@@ -0,0 +1,6 @@
+п»ї<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+ <startup>
+ <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1" />
+ </startup>
+</configuration>
\ No newline at end of file
diff --git a/Module1/Lexer.cs b/Module1/Lexer.cs
index db21a1314c2f0a47d0e7f355d072694200c49e31..8c201ea762698b29913b24e41f6386e0aaab38ad 100644
--- a/Module1/Lexer.cs
+++ b/Module1/Lexer.cs
@@ -83,7 +83,7 @@ public class IntLexer : Lexer
Error();
}
- System.Console.WriteLine("Interger is recognized");
+ System.Console.WriteLine("Integer is recognized");
}
}
diff --git a/Module1/Lexer.csproj b/Module1/Lexer.csproj
new file mode 100644
index 0000000000000000000000000000000000000000..b6c91240fb335a87ff2f606e4405f2bdc23e10a4
--- /dev/null
+++ b/Module1/Lexer.csproj
@@ -0,0 +1,60 @@
+п»ї<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="14.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+ <ProjectGuid>{9715D879-F06E-4A65-ADA0-A4DF3619119D}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>Lexer</RootNamespace>
+ <AssemblyName>Lexer</AssemblyName>
+ <TargetFrameworkVersion>v4.6.1</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+ <PlatformTarget>AnyCPU</PlatformTarget>
+ <DebugSymbols>true</DebugSymbols>
+ <DebugType>full</DebugType>
+ <Optimize>false</Optimize>
+ <OutputPath>bin\Debug\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <ErrorReport>prompt</ErrorReport>
+ <WarningLevel>4</WarningLevel>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+ <PlatformTarget>AnyCPU</PlatformTarget>
+ <DebugType>pdbonly</DebugType>
+ <Optimize>true</Optimize>
+ <OutputPath>bin\Release\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <ErrorReport>prompt</ErrorReport>
+ <WarningLevel>4</WarningLevel>
+ </PropertyGroup>
+ <ItemGroup>
+ <Reference Include="System" />
+ <Reference Include="System.Core" />
+ <Reference Include="System.Xml.Linq" />
+ <Reference Include="System.Data.DataSetExtensions" />
+ <Reference Include="Microsoft.CSharp" />
+ <Reference Include="System.Data" />
+ <Reference Include="System.Net.Http" />
+ <Reference Include="System.Xml" />
+ </ItemGroup>
+ <ItemGroup>
+ <Compile Include="Lexer.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="App.config" />
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file
diff --git a/Module1/Lexer.sln b/Module1/Lexer.sln
new file mode 100644
index 0000000000000000000000000000000000000000..1b3acaa3165c4ec8a6b1d213e1b222d6e8e7d931
--- /dev/null
+++ b/Module1/Lexer.sln
@@ -0,0 +1,22 @@
+п»ї
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio 14
+VisualStudioVersion = 14.0.25420.1
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Lexer", "Lexer.csproj", "{9715D879-F06E-4A65-ADA0-A4DF3619119D}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Any CPU = Debug|Any CPU
+ Release|Any CPU = Release|Any CPU
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {9715D879-F06E-4A65-ADA0-A4DF3619119D}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+ {9715D879-F06E-4A65-ADA0-A4DF3619119D}.Debug|Any CPU.Build.0 = Debug|Any CPU
+ {9715D879-F06E-4A65-ADA0-A4DF3619119D}.Release|Any CPU.ActiveCfg = Release|Any CPU
+ {9715D879-F06E-4A65-ADA0-A4DF3619119D}.Release|Any CPU.Build.0 = Release|Any CPU
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
diff --git a/Module1/Properties/AssemblyInfo.cs b/Module1/Properties/AssemblyInfo.cs
new file mode 100644
index 0000000000000000000000000000000000000000..f6970b03e85a60f8854c0d468a083c50c639530f
--- /dev/null
+++ b/Module1/Properties/AssemblyInfo.cs
@@ -0,0 +1,36 @@
+п»їusing System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Lexer")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Lexer")]
+[assembly: AssemblyCopyright("Copyright В© 2018")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("9715d879-f06e-4a65-ada0-a4df3619119d")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]